Mini Z Overcladding Bars (50mm x 50mm x 50mm) 3m long
Mini Z Overcladding Bars (50mm x 50mm x 50mm) 3m long
£-.--+VAT
Item Specifics
Finish: Galvanised
Galvanised sheeting is a high quality hot dipped zinc coated steel with no additional finishes added. Now the base material for Polyester paint and PVC Plastisol coated roofing sheets, galvanised steel sheets have been used for over 100 years.
It is worth noting that galvanised steel will weather over time and become duller. Also galvanised steel can vary in finish and we highly recommend taking a coated sheet if colour is an issue.
As long as the material is fitted and treated properly then it can last a number of years, however the material is very susceptible to corrosion especially the steel underneath the zinc coating. We do not recommend using galvanised sheets within 3 miles of the coast as coastal environments can significantly decrease lifespan.
Galvanised steel sheets can sometimes be confused with stainless steel, however it is important to note these are different products.
Please be aware that galvanised sheets cannot be painted until they have weathered. This usually takes approx 6 months. If a more durable coloured finish is required please consider polyester painted or PVC plastisol sheets
Galvanised steel is not a colour and surface finish is not consistent. As the steel weathers you will see discolouration in areas. Over time the surface will become rougher as the material weathers. If you require a more consistent finish we would recommend using a coated steel finish such as polyester paint or PVC plastisol.
Care should also be taken when storing galvanised sheets. We recommend storing indoors at a consistent temperature to avoid water ingress and weathering whilst still stacked. Also degreasing the sheets is recommended to remove any excess rolling oil as this may cause reactions when the steel begins to weather.
Finish Properties
| Property | Unit | Value | Test Standard |
|---|---|---|---|
| Standard zinc coating | (g/m2) | 275 (Z275) | |
| Minimum yield stress | (N/mm2) | 220 (S220GD) | EN 10147:2000 |
| Bending and profiling quality | DX51D | EN 10142:2000 | |
| Estimated time to first maintenance*: | |||
| Dry and unpolluted | (years) | 20-50 | |
| Suburban and rural | (years) | 5-10 | |
| Industrial and urban | (years) | 2-5 | |
| Coastal | (years) | 1-5 | |
| Fire classification | A1 | BS EN 13501 |
Product Details
Mini Z Overcladding Bars – 50mm x 50mm x 50mm Galvanised Steel (3m Length)
Mini Z Overcladding Bars are lightweight, galvanised steel sections designed to support overcladding systems on existing roofs and walls. Also known as Mini Z Purlins, these bars are non-load bearing and must be installed on top of existing horizontal supports.
Product Specifications
- Section Size: 50mm x 50mm x 50mm
- Length: 3.000m
- Gauge: 1.2mm
- Material: Galvanised Steel
- Certification: Not CE marked (non-structural use only)
- Application: Overcladding support and wall spacing
Key Features
- Ideal for overcladding existing roofing systems
- Must be fixed to existing horizontal supports
- Can be used to space off walls for cladding installation
- Lightweight and easy to handle on site
- Corrosion-resistant galvanised finish
Applications
- Roof refurbishment and overcladding
- Wall cladding spacing and alignment
- Non-structural support in retrofit projects
- Agricultural, industrial, and modular buildings
Mini Z Bars offer a practical solution for overcladding without the need for structural reinforcement. Contact us to confirm availability, request a quote, or discuss installation details.
Pricing
| Description | Price |
|---|---|
| 3m Mini Z (50mm x 50mm x 50mm) 1.2mm gauge - Galvanised | £18.09+VAT |
